Genelec 8240A Bedienungsanleitung

dspOperating Manual8240A and 8250A DSP Loudspeakers

10Functions on Switch Group 2Stored / Manual CtrlThis allows the selection between two basic methods of controlling the loudspeaker in the stand-alone

11• Connect the GLM Control Network to the main loudspeakers.• Make a System Setup in GLM. It will consist of main loudspeakers as this is

12GuaranteeGenelec 8240A and 8250A are supplied with one year guarantee against manufacturing faults or defects that might alter the performance

13SPECIFICATIONS8240A 8250ALower cut-off frequency, -3 dBUpper cut-off frequency, -3 dB≤ 45 Hz ≥ 21 kHz≤ 35 Hz ≥ 21 kHzFree field frequency response o

148240A 8250AAnalog audio input connector XLR female, pin 1 gnd, pin 2 +, pin 3 -Analog audio input impedance 10 kOhm balancedInput level for maximum

15The curves above show the effect of the “Bass Tilt”, “Treble Tilt”, “Desktop Low Frequency” and “Bass Roll-Off” controls on the free field response

Genelec Document D0048R001a. Copyright Genelec Oy 3.2006. All data subject to change

2

3INTRODUCTIONCongratulations and a thank-you for the purchase of this Genelec 8200 Series DSP Loudspeaker. These systems are designed to integrate eas

4harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and u

5USING THE 8240A AND 8250A IN STAND-ALONE MODEThe 8240A and 8250A accept both analogue line level input signals and AES/EBU formatted digital input si

6“DIGITAL IN AES/EBU” connectorUse this female XLR connector for AES/EBU formatted digital audio input signals. This input is selected automatically w

7The overload light (red) is activated by several events,• exceeding the maximum input range of the analog input• exceeding the maximum input range

8Mounting optionsThe vibration insulating Isolation Positioner/Decoupler™ (Iso-Pod™) table stand allows tilting of the loudspeaker for correct alignme

9This feature is designed to compensate for the boost often occurring at this frequency range when the loudspeaker is placed upon a meter bridge, tabl